Cosplay tools / Scale cosplay props

Scale a cosplay sword, armour piece or other prop. Both reference distances must use the same perspective. Perspective distortion and convention prop rules are not checked automatically.

Go to the toolInstructions
Cosplay props & 3D printingFree & no account needed

Your project

Save on this device
Only in this browser. No cloud or account.

Your result

Enter your inputs and run the tool.

Instructions and examples

Calculate the scale of your cosplay prop

Scale your character sword, staff or armour piece to your own measurements. Use a known distance in the reference image to calculate the target size and print scale of your prop template.

  1. Measure a known reference distance and the prop in the same image, perspective and unit.
  2. Enter your corresponding real measurement in centimetres. Add the original model length in millimetres if known.
  3. Check the target size and print percentage. Transfer a suitable width to the A4 print helper if needed.

For your cosplay project
Free and no account needed.

Go to the cosplay tool
Method and answers

Cosplay example

In one reference image, the character measures 180 units and the sword 120. At your height of 170 cm, the sword would be about 113.33 cm long. Scale a 1,000 mm model to about 113.33%.

Method and frequently asked questions

How your result is calculated

Target prop size = prop distance ÷ known reference distance × your corresponding measurement. Print scale = target size in mm ÷ original model length × 100%.

Why must both reference measurements use the same unit?

The calculation uses their ratio. Different units or perspectives distort that ratio and produce the wrong target size.

Understanding the limits

Can I send the size to the A4 print helper?

For results between 1 and 200 cm, the transfer button sends the width to the local print helper. The image itself is not transferred. Check what direction the measured size represents.

Both reference distances must use the same perspective. Perspective distortion and convention prop rules are not checked automatically.

Privacy at Nekodanshi

Privacy Preference Center